the CAME-TV Argo is a motorized 3-axis handheld gimbal that lets you capture smooth and precise free-floating stabilized camera shots.
Control Board: 32-bit Alexmos
Pan axis Rotation Range: 360 degree
Tilt axis Rotation Range: 360 degree
Roll axis Rotation Range: 360 degree
Load Capacity: 6.6Lb/3Kg
Wireless Frequency: 2.4 GHz
Video Transmitter: 5.8 GHz
Battery Type: Lithium-ion polymer, 18650*4
Battery: 3.7V, 2200 mAh lithium-ion polymer
Battery Runtime: 6-7 hours for still photo, 4-5 hours for video
Power Output: 1* D-Tap, 12 VDC
Supported Camera Dimensions
Maximum Width: 6.3″/16/Cm/
Maximum Height(From top of camera to baseplate): 7.9″/20cm
Depth(From center of mass to rear): 5.1″/13Cm
Gimbal and Battery: 6lb/2.9Kg
Entire Gimbal and Hard Case: 15lb/6.8kg
Package Weight: 7.9kg
Box Dimensions (L*W*H): 49.5*40*20.5cm
1* CAME-TV Argo Gimbal
1* Handle Bar Assembly
2* Handles (1* Left, 1* Right)
1* Adapter Plate
1* Wireless Remote
4* LiPo Battery 18650
1* Battery Charger & Cable
1* Plug Converter
1* Quick Release Plate
1* 15mm Rod Clamp
1* 15mm Rod (3.9″)
1* 5.8 GHz Transmitter Antenna
1* Lens Support
1* 4-Pin Cable
1* Micro-HDMI to Mini HDMI Cable
1* Micro-HDMI Female to Mini-HDMI Male Adapter
1* Carbon Fiber Stand
1* Hard Case
1* PERGEAR Cleaning Kit
6.6 lb Load Capacity. Pre-calibrated 32-bit Alexmos board with encoders for increased accuracy and smoothness, while also benefiting battery life.
Tool-less Balancing. 6-7 hours Battery Runtime for still photo, 4-5 hours for video. Three Operating Modes: Follow mode, Tilt follow/Pan lock mode and All lock mode.
Sports a modular design that allows the gimbal unit to be attached to an included top handle bar assembly for two-handed operation, or to other support devices such as a jib, slider, or drone using a supplied adapter plate. Both handles on the top bar attach via thumbscrews for quick position and angle adjustment, with a center handle useful for low angle shooting or simply carrying the stabilizer between shots.
Gimbal operating mode selection and pan/tilt angle adjustments is performed using a wireless joystick remote. Can be mounted directly to the handle bar for thumb control or used detached from the stabilizer by a second operator.
Beneath the camera baseplate is a 5.8 GHz wireless video transmitter with micro-HDMI input to take the output from your camera and send it to a wireless monitor. Also located beneath the baseplate is a 12V D-tap output to power an optional accessory from the gimbal battery, such as a wireless follow focus motor, which can be mounted using an included single 15mm rod clamp and 3.9″ long rod.